BP121266 - 910 St George Street

Interested in this application? Login to manage subscriptions to subscribe to updates!

Search Again
BP121266 - 910 St George Street
Neighbourhood: Townsite    
Street Address: 910 St George Street
Type of Application: Single / Two Family Alteration
File Number: BP121266
Date Application Submitted: September 10, 2015
Application Description: Construction of an addition at the back of existing residence including a laundry area and renovation to an existing interior washroom.

Revision: Aug 24, 2016 - rafter dimension to 13'10''.

Nov 6, 2017 - Permit renewal fee charged.
Application Status: ACTIVE
Permit Value: $56,962.17
Building Area: 34.10 M2
367.05 ft2
Builder: ADAM PATRICK KOPPEL
Issued Date: November 13, 2015
Expiry Date: November 13, 2019

Associated Properties

Address Zone More
910 ST GEORGE STREET R1 Property Report

Process Steps

Task Status
FOOTING/FORMS

Inspection of forms prior to any concrete being poured. For footing inspection, forms must be complete and approved plans (complete with City stamp) must be onsite.

PASSED
PERIMETER DRAIN

For perimeter drain, foundation walls should be damp proofed and drain tile in place with drain rock covering.

PASSED
UNDERSLAB INSULATION

Inspection required prior to placing slab concrete.

PASSED
PAPER/FLASHING/WATERPROOFING

When framing, sheathing, building paper, flashing, weatherproofing of openings and window installation is complete, but before installation of any siding, wire mesh or stucco.

PARTIAL
PAPER/FLASHING/WATERPROOFING

When framing, sheathing, building paper, flashing, weatherproofing of openings and window installation is complete, but before installation of any siding, wire mesh or stucco.

PARTIAL
LATERAL BRACING & SHEATHING

All nailing and blocking associated with braced wall panels to be completed for this inspection. Wood-based interior braced wall panels to be sheathed. Exterior braced wall panel locations to be clearly marked out on the interior and exterior. Interior braced wall panels to be clearly marked so their location can be seen now and later at the time of INTERIOR BRACED WALL PANEL INSPECTION. Additional anchor bolts shall be installed two per braced wall panel where a building contains framed walls supporting more than two floors.

PASSED
FRAMING

Rough in plumbing & electrical must be complete.

PARTIAL
FRAMING

Rough in plumbing & electrical must be complete.

SCHEDULED
FRAMING

Rough in plumbing & electrical must be complete.

PARTIAL
INSULATION

Insulation and vapour barrier to be complete prior to inspection

PASSED
Map
View in Google Earth (KML)


Disclaimer:

The City of Nanaimo does not endorse any information contained herein by parties not affiliated with the City of Nanaimo. Furthermore, the City of Nanaimo is providing the information contained within this website without warranty, guarantee, or further obligation. The City is not liable for any consequences or damages any individual may incur as a result of misrepresented, misquoted, or mistaken information.

The Information Provided within this website is for Informational Purposes Only. It is not meant to be an authoritative guide, and will not in any circumstances override any decisions or standards made or set by any representative or agent of the City of Nanaimo.

Help us improve our website

Don't include private or financial information in this form.