BP123911 - 5986 Stillwater Way

- Service Centre Plan Checker will set TASK status to IN-PROGRESS to initiate an email to the applicant that the permit is undergoing the initial review. - This will also provide MyCity login information to the applicant. - APPLICATION ACCEPTED Updates Folder Status to NEW - APPLICATION NOT ACCEPTED Corresponds with applicant re incomplete submission and updates Folder Status to ON HOLD - APPLICATION CANCELED Required docs not rec’d after 30 days. Updates Folder Status to CANCELED

Pending signifies that the plan review is complete and the folder has been forwarded to the supervisor for approval. Completed signifies that that the supervisor has completed his review and approved the folder for issue. Supervisor sets permit payment task to REQUIRED

Inspection of forms prior to any concrete being poured

Inspection of forms prior to any concrete being poured

Inspection of forms prior to any concrete being poured

For perimeter drain , foundation walls should be damp proofed and drain tile in place with drain rock covering

For perimeter drain , foundation walls should be damp proofed and drain tile in place with drain rock covering

For perimeter drain , foundation walls should be damp proofed and drain tile in place with drain rock covering

For perimeter drain , foundation walls should be damp proofed and drain tile in place with drain rock covering

Complete underslab plumbing must be visible

Inspection required prior to placing slab concrete

Pipe and Connection must be visible for inspection

Pipe and Connection must be visible for inspection

Pipe and Connection must be visable for inspection

Rough in plumbing must be complete including potable water piping

Rough in plumbing must be complete including potable water piping

All nailing and blocking associated with braced wall panels to be completed for this inspection. Wood-based interior braced wall panels to be sheathed. Exterior braced wall panel locations to be clearly marked out on the interior and exterior. Interior braced wall panels to be clearly marked so their location can be seen now and later at the time of INTERIOR BRACED WALL PANEL INSPECTION. Additional anchor bolts shall be installed two per braced wall panel where a building contains framed walls supporting more than two floors.

When framing, sheathing, building paper, flashing, weatherproofing of openings and window installation is complete, but before installation of any siding, wire mesh or stucco.

When framing, sheathing, building paper, flashing, weatherproofing of openings and window installation is complete, but before installation of any siding, wire mesh or stucco.

When framing, sheathing, building paper, flashing, weatherproofing of openings and window installation is complete, but before installation of any siding, wire mesh or stucco.

Rough in plumbing and electrical must be complete. Survey Certificate & Truss Layouts required for approval

Rough in plumbing and electrical must be complete. Survey Certificate & Truss Layouts required for approval

Rough in plumbing and electrical must be complete. Survey Certificate & Truss Layouts required for approval

Insulation and vapour barrier to be complete prior to inspection

Insulation and vapour barrier to be complete prior to inspection

Insulation and vapour barrier to be complete prior to inspection

The location of interior braced wall panels to be clearly indicated. This inspection is to take place prior to the installation of tape and joint compound.

Exterior of house must be complete including stairs, decks, handrails, porches and exterior finish

Exterior of house must be complete including stairs, decks, handrails, porches and exterior finish

2019-12-11