BP123224 - 432 Howard Avenue

Interested in this application? Login to manage subscriptions to subscribe to updates!

Search Again
BP123224 - 432 Howard Avenue
Neighbourhood: University District    
Street Address: 432 Howard Avenue
Type of Application: Locate Permit
File Number: BP123224
Date Application Submitted: May 03, 2017
Application Description: To complete BP120207 for relocated dwelling

Revision: June 10, 2015 -- Extend deck to front of dwelling, add 6' x 8' deck at side of dwelling, relocate man door to under deck, delete stairs and covered structure from lower floor to upper floor, delete bathroom and office space from garage level and open up wall with beams to connect both garage portions.

REVISION JUNE 30, 2015 - 4' Wall added, beam size changed to 3 Ply 2x8, footing required beneath wall.
Application Status: RETIRED
Permit Value: $15,000.00
Building Area: 170.38 M2
1,833.95 ft2
Issued Date: May 15, 2017
File Close Date: September 10, 2018
Expiry Date: May 15, 2019

Associated Properties

Address Zone More
432 HOWARD AVENUE R1 Property Report

Process Steps

Task Status

Inspection of Forms prior to any cement being poured. For Footing inspection, forms must be complete and approved plans (complete with City Stamp) must be onsite.


Inspection of Forms prior to any cement being poured. For Footing inspection, forms must be complete and approved plans (complete with City Stamp) must be onsite.


All nailing and blocking associated with braced wall panels to be completed for this inspection. Wood-based interior braced wall panels to be sheathed. Exterior braced wall panel locations to be clearly marked out on the interior and exterior. Interior braced wall panels to be clearly marked so their location can be seen now and later at the time of INTERIOR BRACED WALL PANEL INSPECTION. Additional anchor bolts shall be installed two per braced wall panel where a building contains framed walls supporting more than two floors.


When framing, sheathing, building paper, flashing, weatherproofing of openings and window installation is complete, but before installation of any siding, wire mesh or stucco.


The location of interior braced wall panels to be clearly indicated. This inspection is to take place prior to the installation of tape and joint compound.

View in Google Earth (KML)


The City of Nanaimo does not endorse any information contained herein by parties not affiliated with the City of Nanaimo. Furthermore, the City of Nanaimo is providing the information contained within this website without warranty, guarantee, or further obligation. The City is not liable for any consequences or damages any individual may incur as a result of misrepresented, misquoted, or mistaken information.

The Information Provided within this website is for Informational Purposes Only. It is not meant to be an authoritative guide, and will not in any circumstances override any decisions or standards made or set by any representative or agent of the City of Nanaimo.

Help us improve our website

Don't include private or financial information in this form.

Collection and use of your personal information
Information collected on this form is done so under the general authority of the Community Charter and Freedom of Information and Protection of Privacy Act (FOIPPA), and is protected in accordance with FOIPPA.  Personal information will only be used by authorized staff to fulfill the purpose for which it was originally collected, or for a use consistent with that purpose. Questions about the collection of your personal information may be referred to the Legislative Services Department at (250) 755-4405, or via email at foi@nanaimo.ca.
Privacy Policy